Description
HI96750 Potassium Photometer
HI96750 Potassium Photometer
The HI96750 is a portable device .
HI96750 measures the potassium (K) content in water samples in the 0.0 to 10.0 mg/L (ppm) for low range and 10 to 100 mg/L (ppm) for medium range.
The HI-96750 Method is Tetraphenylborate .
please see the important device at a glance :
- Clear display messages make the instrument quick and easy to operate.
- The powerful Cal Check calibration function means that there is no need to return the instrument to the laboratory to check its efficiency.
- Samples can be checked and validation confirmed at the press of a button.
- Positive locking system ensures the cuvette is located in the same position each and every time is it placed in the measurement cell.
- Auto shut off feature turns meter off after 10 minutes of non-use to save battery life.
- Fully water resistant.
- Clear easy to use function buttons.
- Direct readout of parameter measured.
Order information
- Meter only (HI -96750): 2 glass cuvettes, 9V battery
NB: reagents ordered separately
To know HI96750 HANNA price or buy HI96750 Potassium Photometer , please contact Setare Arsh Aria company.
HI96750 Potassium Photometer Specifications
| Range | LR: 0.00 to 10.0 mg/L (ppm); MR: 10 to 100 mg/L (ppm) | |
| Resolution | LR: 0.01 mg/L; MR: 1 mg/L | |
| Accuracy | LR: ±1.5 mg/L ±7% of reading; MR ±15 mg/L ±7% of reading | |
| Light Source | LED | |
| Light Detection | Silicon Photocell with narrow band interference filter @ 466nm | |
| Battery Type / Life | 1 x 9V / approx. auto-off after 10 minutes of non use |
|
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
| Dimensions | 193 x 104 x 69 mm | |
| Weight | 360 g | |
| Method | Adaptation of the Turbidimetric Tetraphenylborate Method. | |
| Ordering Information | HI-96750 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality certificate and instruction manual. | |
| Reagents and Standards (sold separately) | HI-96750-11 CAL CheckTM standard cuvettes; HI-93750-01 Reagent for 100 tests; HI-93750-03 Reagents for 300 tests |
| PLEASE NOTE: | In some cases, samples may contain other parameters which may interfere with results | |
| Interference may be caused by: | The following ions do not interfere below these concentrations: Ammonium 10ppm, Calcium 10000ppm as CaCO3, Chloride 12000ppm, Magnesium 8000ppm as CaCO3, Sodium 8000ppm. Colour or suspended matter in large amounts will cause interference. |
Reviews
There are no reviews yet.